1. 24-Hour Hour Hotline
  2. Phone : +8618663503588
  3. Email : hdtsteel98@aliyun.com
HDT Tubing
Hot dip galvanized steel pipe specification
Hot dip galvanized steel pipe specification
Hot dip galvanized steel pipe specification
Hot dip galvanized steel pipe specification
Hot dip galvanized steel pipe specification

Hot dip galvanized steel pipe specification

Brand
HDT steel
Length
6-12m
Standard
GB/ASTM/JIS/DIN
Delivery time
7-15 days
Payment method
T/T L/C
Product customization
Yes
In stock
Yes
Hot dip galvanized steel pipe, the general selection is hot dip galvanized processing technology, steel pipe inside, the surface is zinc layer. Galvanized pipes are available in different specifications with matching od and wall thickness. Choose the right product according to your own needs.

1.Product specification


Product specification
specificationsOuter diameter(unit:mm)wall thickness (ordinary)(unit:mm)wall thickness (upset)
1/221.32.753.25
3/426.82.753.5
1
33.5
3.254
1.2542.33.254
1.5483.54.25
2603.54.5
2.575.53.754.5
388.544.75
411445
51404.55.5
61654.55.5
8219.15.56.5


2.product quality performance


Chemical composition and performance advantages
chemical compositionperformance advantages
carbon and silicon
Improve the hardness of steel
phosphorusmake the cutting of low carbon steel easy to break,improve the machinability of steel
manganese
Improve the strength,wear resistance of steel
thungsten
Improve the red hardness, thermal strength,wear resistance of steel
chromiumImprove the hardenability and wear resistance of steel, improve the corrosion resistance,oxidation resistance of steel
zincImproved corrosion resistance


3.Multiple cutting methods


    The hot dip galvanized steel pipe is usually 6 meters, but sometimes 3 meters may be needed in some parts of the project, at this time it is necessary to cut the hot-dip galvanized steel pipe. There are many ways and tools to cut, depending on personal choice. Personal skills are part of the story. In the cutting of hot dip galvanized steel pipe, we can use a general cutting machine.In order to ensure that the pipeline processing is not deformed, it is important to choose the cutting machine that meets your welding requirements. The cutting machine is not the same, the way of cutting will be different, and there are some other ways. Japan is now commonly used in agricultural production system mechanical cutting, flame cutting and water cutting these several ways, these three ways can ensure that the pipeline is not deformed.

    Firstly:Mechanical cutting using external installation and internal installation of two, the use of turning tool processing principle of the pipe mouth cut off and beveling processing, single span, processing thickness, less waste, pure, processing process does not produce high temperature, does not affect the pipeline material, conducive to welding. Water cutting through high pressure pump and emery joint action processing pipeline, the incision is clean, processing span is large, but its low efficiency, processing thickness limited factors are serious.

    Secondly:Oxygen acetylene flame cutting, by adjusting the oxygen valve and acetylene valve, can change the mixing ratio of oxygen and acetylene to get three different flames: neutral flame, oxide flame and carbonization flame.

    Thirdly:Plasma cutting, plasma cutting with different working gas can cut all kinds of oxygen cutting difficult to cut metal, especially for non-ferrous metals (stainless steel, aluminum, copper, titanium, nickel) cutting effect is better; Its main advantages lie in the cutting thickness of the metal, plasma cutting speed is fast, especially in the cutting of ordinary carbon steel sheet, the speed can reach the oxygen cutting method 5~6 times, cutting surface smooth, small thermal deformation, less heat affected area.

    These methods are also commonly used in pipe cutting.

hot-dip-galvanized-steel-pipe.jpg


If you want to ask anything just fill in the form below and send us. We will contact you within 12 hours.

Name: Galloway        time:2022-03-18 10:40:43
A good value I liked the value and the quality of the hot dip galvanized steel pipe thank you.

Write a review

FEATURED PRODUCTS

Copyright ©2022 HDT Tubing Co.,Ltd All Rights Reserved.

Quick links:Steel manufacturers, Steel coil manufacturers, Carbon steel coil manufacturers, Galvanized coil manufacturers, Color coated coil manufacturers, Cold rolled coil manufacturers, Pre coated galvanized steel PPGI manufacturers, Steel sheet manufacturers, Carbon steel plate manufacturers, Stainless steel manufacturers, Carbon steel pipe manufacturers, Square steel pipe manufacturers, Welded steel pipe manufacturers,
Friend links: Steel coil manufacturers, Steel pipe manufacturers, Flatbed Trailer suppliers