Brass Pipe Price In UAE Market

Brass Pipe Price In UAE Market
Brass Pipe Price In UAE Market
Brass Pipe Price In UAE Market
Brass Pipe Price In UAE Market
Brass Pipe Price In UAE Market
Copper tubing's strong, corrosion-resistant properties make it the modern contractor's first choice for plumbing, heating, and cooling piping in all residential and commercial properties. Brass pipes are the best water supply pipes.

1.What is copper pipe?

Brass tubes, a type of non-ferrous metal tubes, are pressed and drawn seamless tubes.Copper pipe has good electrical conductivity and thermal conductivity, and is the main material of conductive accessories and heat dissipation accessories of electronic products, and has become the first choice for modern contractors to install tap water pipes, heating and cooling pipes in all residential commercial buildings. Copper tubes have strong corrosion resistance, are not easy to oxidize, and are not easy to chemically react with some liquid substances, and are easy to bend.

2.Mechanical Properties of Brass.

牌号

化学成分(%

名称

代号

Cu

Fe

Pb

Al

Mn

Sn

Ni

Zn

杂质总和

68黄铜

H68

67.0-70.0

0.10

0.03

0.5

余量

0.3

65黄铜

H65

63.5-68.0

0.10

0.03

0.5

余量

0.3

63黄铜

H63

62.0-65.0

0.15

0.08

0.5

余量

0.5

62黄铜

H62

60.5-63.5

0.15

0.08

0.5

余量

0.5

3.Characteristics of brass tubes.

The brass tube is light in weight, has good thermal conductivity and high strength at low temperature. It is often used in the manufacture of heat exchange equipment (such as condensers, etc.). It is also used to assemble cryogenic pipelines in oxygen generating equipment. Copper tubes with small diameters are often used to transport pressurized liquids (such as lubrication systems, oil pressure systems, etc.) and pressure measuring tubes used as instruments. Brass tubes are strong and corrosion resistant.

It mainly has the following advantages: the copper tube is hard, not easy to corrode, and resistant to high temperature and high pressure, and can be used in various environments without copper. Compared with brass pipes, the disadvantages of many other pipes are obvious. For example, galvanized steel pipes used more in residential buildings in the past are easy to rust, and the tap water will turn yellow and the water flow will become smaller after a short period of use. There are also some materials whose strength will decrease rapidly at high temperatures, which will cause unsafe hazards when used in hot water pipes. However, since the melting point of copper is as high as 1083 degrees, the influence of the temperature of the brass pipe on the hot water system is basically negligible. Common brass tubes include brass tubes for electrical appliances, brass tubes for refrigeration, high-pressure brass tubes, corrosion-resistant brass tubes, brass tubes for connections, brass tubes for waterways, electric heating brass tubes, and industrial brass tubes. Copper pipes, etc.

4.Drawn brass tube.

The drawn brass tubes are divided into five grades according to the chemical composition: H96, H62, H68, HSn62-1, HSn70-1. Pipe length and allowable deviation regulations: variable length, outer diameter ≤ 50mm, the length is 1000~7000mm, outer diameter> 50mm, the length is 500~6000mm. The length of fixed length or double length should be within the range of undetermined length, and the allowable deviation of length is 15mm. The length of the double ruler should be added with the sawing amount, and each sawing amount is 5mm.

5.Classification of brass.

If a variety of alloys composed of more than two elements are called special brass. Such as copper alloy composed of lead, tin, manganese, nickel, iron and silicon. Brass has strong wear resistance. Special brass is also called special brass, which has high strength, high hardness and strong chemical corrosion resistance. The mechanical properties of cutting processing are also outstanding. The seamless copper tube drawn from brass is soft and wear-resistant. Brass seamless tubes can be used in heat exchangers and condensers, cryogenic piping, subsea transportation pipes. Manufacture of sheets, bars, rods, pipes, casting parts, etc. Containing 62% to 68% copper, it has strong plasticity and can be used to manufacture pressure-resistant equipment. According to the different types of alloying elements contained in brass, brass is divided into two types: ordinary brass and special brass. Brass for pressure processing is called deformed brass.

6.The use of brass tube.

Copper pipes are often used as water pipes instead of steel pipes, and they have two types: hardened tempered and softened tempered. Both tempered copper tubes are available in 20-foot straight lengths. Softened and tempered copper tubing is also available in 1.25 inch diameter in 30, 45 and 60 foot coils. The pipe is joined using a torch and solder or brazing alloy to solder its ends into specific fittings. Due to its flexible nature, the tube can be easily bent and changed, thereby reducing the number of fittings and labor required. This type of pipe is often used instead of lead pipe to connect water mains into buildings.

7.UAE market brass tubes price.

Products are exported to Europe, America, the Middle East, Southeast Asia and other regions, the United Arab Emirates is one of our main export countries. The price of brass tubes is affected by factors such as raw material prices and purchase volume, specifications, and markets. HDT Tubing Co., Ltd (https://www.hdtsteel.com) is a large brass tube manufacturer in China. We have advanced production equipment, strong technical strength and perfect after-sales service. We can offer competitive price, USD 8000-10000/ton. If necessary, please contact us, we will give you the best price according to your specific needs.


No article.

Send a Message

If you want to ask anything just fill in the form below and send us.

Write a review

Featured Products

We also offer other similar steel products

New Products

We also offer other similar latest steel products